Westerbeke 3.0 MCGA EFI Marine Gas Generator

Operating with 2-cylinders instead of 1, at a low 2200-rpms instead of 3000 or 3600, and with a specially designed flywheel: the Westerbeke 3.0 BPMG provides smooth performance and doesn’t require a sound shield. Weighing in at only 165 pounds, the Westerbeke 3.0 BPMG weighs less per kW than one would expect. The Westerbeke 3.0 BPMG is powerful enough to run an air conditioner or water heater, etc.

Features :

• Simple, “one touch” start/stop control panel with running hour meter
• Electronic governing
• Overspeed protection
• Safety shut-downs — overspeed, low oil pressure, high exhaust temperature
• A.C. circuit breaker
• Battery charger
• Water injected exhaust elbow
• Belt-driven, raw water pump
• Vibration mounts
• Lube oil drain hose
• Belt guards
• Operators’ manual and parts list

Specifications

• Number of Cylinders 2 Cylinder, horizontal in-line
• Type 4 cycle
• Displacement 20.0 cu. in. (.33 liter)
• Bore and stroke 2.32″ x 2.36″ (59.0mm x 60.0mm)
• Compression ratio 9:1
• Rated RPM 2200
• HP @ Rated RPM 6.0 HP
• Maximum angle of operation Not to exceed 25° in all directions
• Exhaust elbow conn. 2.0″ OD (50.8mm)
• Raw water conn. .50″ OD (12.7mm)
• Dry weight 165 lbs (75 kg)
• Combustion system Semi-spherical type
• Aspiration Naturally aspirated
• Lubrication system Forced pump
• Cooling system Raw water
• Full load fuel consumption .4 GPH (1.5 LPH)
• Carburetor Side draft type
• Governor Electronic
• Lube oil filter Full flow, spin on element
• Lubricant capacity 1.5 quarts (1.4 liters)
• Fuel transfer pump Mechanical type